On this issue, we should understand the automatic lathe andWeiya CNC vertical latheThe principle of processing. Automatic lathes use cam motion to cut the moving knife, while Weiya CNC vertical lathes use programming and program to control the movement of the knife. In terms of power, automatic lathes are much higher than CNC lathes, so the processing cost of automatic lathes is cheaper than Weiya CNC vertical lathes. If the product is more complex, if the requirements are higher, the automatic lathe may not be able to do this. It can only be processed by CNC lathes, but the processing cost is higher than that of automatic lathes. For the product, we choose to use automatic lathe or CNC. It is important to see the difficulty of the product.

　　Weiya CNC vertical latheThe machining process is similar to that of an ordinary lathe, but because the CNC lathe is a one-time clamping, continuous and active machining to complete the turning process, the following aspects should be paid attention to and the cutting parameters should be selected reasonably: For high-power metal cutting, machining data, cutting objects and cutting premise are the three elements that determine the processing time, tool life and processing quality, and the economical and practical processing method is the reasonable choice of cutting premise. The three elements of cutting premise: cutting speed, feed speed and cutting depth directly lead to tool damage. As the cutting speed increases, the tip temperature increases, but mechanical wear, chemical wear and thermal wear occur. When the cutting speed is increased by 20%, the tool life will be reduced by 1/2. The feed premise is related to the wear of the trailing edge of the tool in a small range, but the feed speed is large, the cutting temperature rises, and the trailing edge wear is large. It has less influence on the tool than the cutting speed. Although the influence of cutting depth on the tool is not as great as the cutting speed and feed speed, the hardening layer of the cutting data will appear when cutting at a small depth, which will also affect the tool life.

The user should select the cutting speed to be used according to the processing data, hardness, cutting conditions, data types, feed speed, cutting depth, etc. Choose more suitableWeiya CNC vertical latheThe processing premise is based on these factors. SelectWeiya CNC vertical latheIn processing plants, regular and stable wear is an ideal prerequisite for reaching service life. However, in actual operation, the choice of tool life is related to tool wear, changes in processing standards, appearance quality, cutting noise, processing heat, etc. Under the premise of processing, it needs to be studied according to the actual situation. For data that is difficult to process, such as stainless steel and heat-resistant alloys, you can choose coolant or rigid blades. Turning is a method that uses the rotation of the workpiece relative to the tool to cut the workpiece on a CNC lathe. The cutting energy of turning is mainly provided by the workpiece rather than the tool. Turning is a basic and commonly used cutting method. Turning is suitable for machining reverse surfaces. Most workpieces with reverse surfaces can be processed by turning, such as inner and outer cones, end faces, grooves, threads, and reverse forming surfaces. The tools used are mainly turning tools.