Small CNC vertical lathe_CNC vertical latheIt is mainly used for processing large and heavy workpieces with large diameter and short length and workpieces that are not easy to clamp on horizontal lathes. Under the condition that the rotary diameter is satisfied, the workpiece that is too heavy is not easy to clamp on the sleeping car. Due to its own weight, it has an impact on the processing accuracy.CNC vertical latheThe above problems can be solved.

Small CNC vertical lathe_CNC vertical latheBefore putting into use, to ensure that the control handle should be flexible. When pulling the control handle to the "start" position, the rocker arm pressing the friction plate should reach the self-locking position to ensure reliable positioning.CNC vertical latheWhen machining eccentric workpieces, add counterweight iron to keep the balance of the worktable and clamp the counterweight iron firmly to prevent throwing out and hurting people. The friction clutch in the fast travel mechanism is intact and can play a protective role when the load is too large. The insurance pin in the insurance coupler in the feed box meets the design requirements to prevent accidents due to overload.

Small CNC vertical lathe_CNC vertical latheThere shall be a limit device to prevent the cross beam and tool holder from moving beyond the stroke. The operation platform shall be equipped with retaining rods and bottom protective plates, and all control handwheels shall be equipped with positioning devices and obvious gear signs. The bolts and nuts for pressing the hand wheel shall be complete, intact and fastened. The triangular tape and the coupling of the main motor and gearbox shall be provided with protective covers,CNC vertical latheThe workbench shall be provided with a fence to prevent injury when the workbench rotates, and a chip baffle shall be provided around it.

Small CNC vertical lathe_CNC vertical latheDuring the operation, tools and measuring tools are not allowed to be placed on the crossbeam tool holder, and iron filings are not allowed to be cleaned directly by hand, and special tools should be used for cleaning. Loading and unloading of workpieces and tools should be closely coordinated with the driver and hook worker, and workpieces and tools should be fastened well. The jack, inclined plate, cushion block, etc. used should be fixed and checked frequently to prevent loosening. Before the workpiece is clamped, the workpiece can only be corrected by inching. Attention should be paid to keeping a certain distance between the human body and the rotating body. It is forbidden to standCNC vertical latheThe rotary table is adjusted on the machine tool and operating buttons. Non-operating personnel are not allowed to approach the machine tool.